Product Family · Spin Motors
Spin Motor XM-8058-1 — the Twin-Tub Specialist
A twin-tub machine is two machines in one cabinet, and its spin side wants a different motor from its wash side: the XM-8058-1, listed at 25–90 W for the high-speed, short-cycle work of spin drying. This page documents that model. It also shows photographs attached to three different listings — XM-8028, XM-8098 and XM-8058-1 — as three separate listings, not as variants of one model. Attribution follows the listing record: each card names the listing its photograph is attached to. That record does not by itself establish the model of the physical motor in the photograph — a motor’s model is checked against its own rating plate.
- Model
- XM-8058-1
- Power
- 25–90 W
- Voltage
- 220–240 V / 110 V
- Frequency
- 50 / 60 Hz
- Winding wire
- Copper / aluminium / CCA
- Listed MOQ
- 1,000 pieces
- List price
- US$5.00–8.00 / pc
All fields as published in the company’s catalogue listing for this model.
01 Photographs from Three Listings
Three listings, three photographs
The company’s catalogue photo set contains photographs attached to three different listings. They are reproduced here exactly as photographed, and each card names the listing the photograph belongs to. A photograph attached to another listing is not evidence that the XM-8058-1 is supplied in that bracket form: the bracket form of the specific model you order is confirmed against your drawing or sample, for that model, before quotation.
Triangular three-point plate — XM-8028 listing photo
Photograph attached to the XM-8028 listing in the company’s catalogue photo set, showing a triangular three-point mounting plate.
Hexagonal bracket — six-sided pressed bracket
Photograph attached to the XM-8098 listing in the company’s catalogue photo set, showing a six-sided pressed bracket.
Keyhole-slot bracket — XM-8058-1 listing photo
The XM-8058-1 listing’s own photograph — slotted fixings visible in the photograph.
Photo note: these are photographs of three different listings — XM-8028, XM-8098 and XM-8058-1 — not three variants of one model, and no bracket choice for a model is offered from another listing’s photograph. Which bracket the specific model you order carries is confirmed against your drawing or sample before quotation, for that model.
02 The Full Listing
XM-8058-1, exactly as catalogued
| Model number | XM-8058-1 |
|---|---|
| Product | Spin motor (for twin-tub spin dryers) |
| Power | 25–90 W |
| Voltage | 220–240 V / 110 V |
| Frequency | 50 / 60 Hz |
| Winding wire options | Copper, aluminium or copper-clad aluminium |
| Specification basis | IEC 60034 (as listed) |
| Trademark | Nanyang |
| HS code | 85014000 |
| Listed MOQ | 1,000 pieces |
| List price range | US$5.00–8.00 per piece (catalogue list price — confirm current pricing per order) |
| Packing | On pallets or in cartons |
| Payment terms | L/C, T/T |
Why does a spin motor deserve its own model rather than a second wash motor? Duty. A wash motor reverses constantly at low speed against a heavy, waterlogged load; a spin motor accelerates one way to full speed and holds it, cycle after cycle, in the dampest corner of the machine. Bracket geometry, shaft sealing expectations and winding duty all follow from that. Pairing the XM-8058-1 with a wash motor from the same catalogue — the 25–220 W wash range — gives a twin-tub programme one supplier, one shipment and matched electrical options across both halves of the machine. Which motor does a spin dryer actually need, spin or wash pattern? Send the existing motor’s nameplate and bracket dimensions; the answer comes back with the quotation.
03 Questions
Spin motors, answered plainly
Which bracket will the motor I order have?
The bracket is part of the order specification for the specific model ordered. Send a photo or drawing of the bracket you need; the reply confirms, for that model, whether it can be matched. The photographs above belong to three different listings and are not a choice of variants for one model — no quotation names a variant from another listing’s photograph.
Can the spin motor be supplied with the wash motor in one shipment?
Yes — both are catalogue models with the same packing and terms, and combining them is the normal twin-tub programme. State both quantities in one enquiry.
Is a 25–90 W spin motor enough for a large twin-tub?
Spin loads depend on tub size and target spin speed. Give us the tub capacity class and the motor you use today; suitability is confirmed in writing before you commit.
Twin-tub programme? Quote both halves together
Wash motor plus spin motor, one enquiry, one shipment. Send quantities and bracket photos for the fastest accurate reply.