Applications · Kitchen Ventilation
Range Hood Motors for Hood Manufacturers
A range hood motor works in the worst air in the house — hot, grease-laden, and expected to stay quiet enough to cook under. This page serves hood manufacturers with general background: how the duty is specified, the architectures commonly used for it, and the programme route. Whether a specific line is feasible for a specific hood application is assessed per programme against the hood maker’s drawings and data. The company does not sell retail replacement motors for installed hoods.
- Model data
- Not published in the company catalogue
- Specification
- Confirmed per project, in writing
- Drawings / samples
- Availability confirmed per enquiry, in writing
This line is assessed project by project. Send your equipment drawings and duty data; the reply assesses feasibility first, and any specification, drawings, samples or pricing follow that assessment, in writing.
01 The Duty
Hot air, grease, and an audience
Kitchen extraction combines three demands that rarely coincide elsewhere. The airstream carries cooking grease that deposits on every surface it touches, so motor placement relative to the airstream and the protection of windings and bearings are design questions, not details. The heat is real: the motor works above the appliance that produces the kitchen’s highest temperatures. And the acoustic bar is social — a hood too loud to talk under is a hood that stays switched off, which is why multi-speed operation is a product feature rather than a luxury in this category. These are industry-common characteristics of the application, stated as background for specifiers; feasibility for any given programme is assessed against the hood maker’s own drawings and test data.
As general selection background — not as a claim about this company’s application coverage — compact hood designs commonly use shaded pole motors, and integrated blower packages commonly use external rotor units. The company’s platform profile names fan motors among its main lines. Whether a specific line is feasible for a specific hood application is assessed per programme against the hood maker’s drawings and data.
Hood design also decides the service story, and the motor programme should hear it early. A hood whose motor can be reached and replaced in minutes tolerates a different specification conversation from one sealed into the chimney for life — the second design must buy its reliability entirely at the factory, in winding, bearings and balance, because the field will never get the chance to forgive it. Tell us which design yours is, with the hood drawings; feasibility is assessed for that service reality, not for a generic hood, before any specification is proposed.
02 Specifying
The range hood checklist
- Hood design: chimney, under-cabinet, island or integrated; single or twin fan arrangement
- Air duty: extraction rate targets at each speed setting, against your ducting assumptions
- Speeds & control: number of speeds and the control method your product uses
- Motor position: in or out of the grease path; ambient temperature at the motor
- Electrical: market voltage and frequency; any lighting or control loads sharing the supply design
- Programme: volumes, the hood models in the programme, and the finished product’s certification and noise documentation needs
03 Questions
Range hood motors, answered plainly
Can one motor design serve several hood models?
State the family’s range and drawings in the enquiry; feasibility is assessed for the family as one programme before any common specification is proposed.
How is grease handled in motor selection?
By position and protection specification: where the motor sits relative to the airstream is your design’s decision; what protection and insulation provisions a motor for that position would need are assessed against the position and your hood data before any specification is proposed.
Do you sell hood motors to the repair trade?
No — retail and repair-trade supply is not offered. OEM programme enquiries from hood manufacturers are assessed per programme against the hood data.
Quiet is a specification — send yours
Send extraction targets, speeds, motor position, volumes and your hood drawings — the reply assesses feasibility against your appliance data before any matching is confirmed.